Image switching behaviour
36
Siemens Building Technologies
Fire Safety & Security Products
06.2008
5.2.2 Sub-station
x
You must allocate the sub-station outputs to the central inputs here.
During this process the following applies:
The sub-station outputs are always numbered from output 1. For example, if sub-
station 1 is connected to the main video matrix by four video cables (four
channels), these outputs are automatically designated outputs 1 to 4 on
sub-station 1.
You must now indicate the main video matrix inputs to which these four channels
are connected. In principle there are no restrictions on which inputs on the main
video matrix are used. If you have connected sub-station outputs 1 to 4 to inputs 5
to 8 on the main video matrix, you must enter 5 for the lowest input channel and 8
for the highest input channel.
Fig. 24
Sub-station: x
