Programming keyboards
46
Siemens Building Technologies
Fire Safety & Security Products
06.2008
Lock camera
This function allows the user to disable his choice of video input for an automatic
picture cycle. The video output can either be selected at the keyboard using the
digit keys, or selected in the display window using the scroll bar.
Zyk.K –
1.
Preselect the relevant camera using the
Input/preselect
function (see above)
2.
Enter the output that corresponds to the image sequence and then execute
the
Lock camera
function. If you do not preselect a camera, the camera that
is currently switched will be disabled.
ZyK. –x
3.
You can also permanently program the output rather than enter it using the
digit keys. This means that either the current camera can be disabled for the
preset output at a press of a button,
– or –
you can enter the number of the camera you want to disable using the digit
keys
4.
Then execute the
Input/preselect
function
5.
And finally execute the
ZyK.-x
function.
Cycle start
This function starts an automatic picture cycle on any monitor or a programmed
monitor.
Start
z
Image sequence on a chosen monitor
Enter the number of the desired video output at the keyboard using the digit
keys, then press the key that has been allocated this function.
The scroll bar in the display window must be set to its initial position.
Start x
z
Image sequence on a set monitor
Program the video output using the scroll bar in the display window. The
sequence can be started at the keyboard at the press of a button.
You can also use this function to start a preset sequence (see section 8.2).
