Programming keyboards
43
Siemens Building Technologies
Fire Safety & Security Products
06.2008
z
Video inputs preselection without number presets
Enter the number of the desired video input at the keyboard using the digit keys,
then press the key that has been allocated this function.
The scroll bar in the display window must be set to its initial position.
X –>
z
Video input preselection with number presets
Use the scroll bar in the display window to set the video input that will always be
switched by pressing the function key.
Procedure at the keyboard:
Output
This function allows selection of the video output to which you want to switch the
image signal.
The square, grey button in the display window can be used to select one of the two
switching options described below:
MON
z
Switching to any monitor
Enter the number of the desired video output at the keyboard using the digit
keys, then press the key that has been allocated this function.
M-Rep.
z
Switching the chosen video input to the monitor that was last selected using this
keyboard.
In this particular case, it is not necessary to enter the number of the video output
each time.
Enter the number of the video input (max. 255) using the digit keys and then
press this key.
