manualshive.com logo in svg

Siemens SIMATIC RF300, System Manual

Share
Download
Siemens SIMATIC RF300 System Manual Download Page 413

System integration

9

The communication modules (interface modules) are links between the RFID components 
(reader and transponder) and the higher-level controllers (e.g. SIMATIC S7), or PCs or computers.

Connection to controllers

The readers are connected to the controller via the following communication modules: 

• ASM 456

• ASM 475

• SIMATIC RF120C

• SIMATIC RF160C

• SIMATIC RF166C

• SIMATIC RF170C

• SIMATIC RF180C

• SIMATIC RF182C

• SIMATIC RF185C/RF186C/RF188C, RF186CI/RF188CI

• RFID 181EIP 

 You will find information on the communication modules on the Internet on the pages of the 
Siemens Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/15105/

man

).

Function blocks, communication modules and readers 

Function blocks are used for integration into the SIMATIC. They are used to transfer the input 
parameters to the reader using the "init_run" (RESET) command.

You will find information on the following blocks on the Internet on the pages of the Siemens 
Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/14971/man

).

• Ident profile and Ident blocks, standard function for RFID systems

The Ident library linked into the TIA Portal as of STEP 7 Basic / Professional V14 SP 1

• RFID standard profile; standard functions for RFID systems

• FB 45 for MOBY U, MOBY D, RF200, RF300

• FB 55

• Communication module RF160C with FC 44

Configuration and parameter assignment by means of TIA Portal technology object

SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09

413

Summary of Contents for SIMATIC RF300



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands