manualshive.com logo in svg

Siemens SIMATIC RF300, System Manual

Share
Download
Siemens SIMATIC RF300 System Manual Download Page 179

5.4.5

Pin assignment of the interfaces

The following tables show the pin assignment for the interfaces/connectors.

Table 5-19

Pin assignment power supply; M12 socket (4-pin, L-coded)

Pin

Assignment

View of M12 socket, 4-pin

1

24 V DC (brown)

2

Unassigned (white)

3

0 V DC (blue)

4

Reset to factory (black) 

1)

1)

Note that this pin must not be assigned to a cable core.

Table 5-20

Pin assignment PROFINET IO; M12 socket (4-pin, D-coded)

Pin

Assignment

View of M12 socket, 4-pin

1

Data line TxP

2

Data line RxP

3

Data line TxN

4

Data line RxN

5.4.6

LED displays

Reader LED display

The operational states of the reader are displayed by two LEDs. The LEDs can adopt the colors 
white green, red, yellow or blue and the states off , on , flashing :

Table 5-21

Shows the operating states via the operation LED display

LEDs

Meaning
The reader is turned off.

The reader is turned on and is searching for transponders.
The reader is in the "Setup" mode, in the "Search for transponders" status and has 
not yet received a "RESET" command and is not ready.

Readers

5.4 SIMATIC RF360R

SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09

179

Summary of Contents for SIMATIC RF300



























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands