Siemens SENTRON 3VL series System Manual Download Page 91

Page: 91 / 360

Installing/mounting

7.3 Locking devices

3VL molded-case circuit breakers
System Manual, 03/2009, 110 0110 - 02 DS 01

7.3

Locking devices

Locking device for the toggle handle

The locking device for the toggle handle is

designed to be easily attached to the circuit

breaker collar. This device allows the handle

to be locked in the "OFF" position. The

locking device for the toggle handle can be

installed in 3-pole and 4-pole circuit

breakers. Up to 3 padlocks with shackle

diameters ranging from 5 to 8 mm may be

used. (Not for the VL160X with RCD

module)

Summary of Contents for SENTRON 3VL series









































































































































































































































































































































































Search results

Summary of Contents for SENTRON 3VL series

Reviews:

Related manuals for SENTRON 3VL series

Brands by name

Popular brands

Siemens SENTRON 3VL series, System Manual

Search results

Summary of Contents for SENTRON 3VL series

Reviews:

Related manuals for SENTRON 3VL series

Brands by name

Popular brands