Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 125 / 322

Installation

5.3 Inserting media modules and SFP transceivers

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

125

Select the required SFP media module in the slot

of the device. (Example: X-308-2M, slot 2)

Insert the SFP with the clip closed in the SFP

media module.
Notice: Closing the clip after insertion does not

lock the device in the rack.

The SFP can be heard to lock in place and is

therefore firmly secured.

Plug the connecting cable into the SFP.

The connecting cable can be heard to lock in

place and is then firmly secured.

Removing an SFP

Remove the cable connected to the SFP.

Open the clip on the SFP and remove the SFP from the SFP media module.
Notice: It must be possible to remove the SFP easy without using force.

Fit a blind plug to the SFP.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands