Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 319 / 322

Appendix

A.6 Equipotential bonding

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

319

●

The connections between the individual segments of channels must be protected from

corrosion (longterm stability)

●

If there are connections between sections of buildings (for example separated by

expansion joints) with their own reference point for the building ground network, a

bonding conductor (equivalent copper cross

sectional area ≥10

) must be installed

parallel to the cables. This bonding conductor is not necessary if metal, conducting cable

channels/racks are used.

Note
Bonding conductors are unnecessary if the sections of a system are connected

exclusively using fiberoptic cable (FO).

Notes on systems in which no equipotential bonding is possible

To ensure greater immunity to interference, cables for SIMATIC NET PROFINET and

PROFIBUS are always shielded. Due to the defined shielding property, the shield needs to

make contact at both ends.
In systems in which no equipotential bonding is possible, the current flow via the shield

needs to be prevented. Despite this, to be able to use the shield properties of the cable note

the following:

●

Contact the shield at one end with low resistance.

●

Connect the other end of the shield to the grounding system using capacitive coupling.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands