Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 118 / 322

Installation

5.2 Installing a switch

SCALANCE X-300

118

Operating Instructions, 05/2016, A5E01113043-20

Normal orientation

Normal orientation of the device

•

The LED display is on the left of the front panel of the hous-

ing.

•

The Ethernet ports or the slots for the modules are also on

the front of the housing. Slots for the modules are fitted with

dummy covers.

•

The C-PLUG is on the right behind a protective panel se-

cured with screws.

(For more detailed information, refer to the section on the C-

PLUG in the X-300 operating instructions.)

•

The ventilation grilles are on the top, bottom and sides of the

housing.

SCALANCE XR324-4M EEC

•

On the rear of the device, you will find the diagnostics port.

•

The grounding bolt and the connectors for the signaling

contact and power supplies are also on the rear of the de-

vice.

Note that there are different power supplies (see section

"XR-300M EEC product group (Page 32)").

SCALANCE XR324-4M EEC

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands