Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 223 / 322

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

223

Approvals, certificates, standards

9.1

X-300 product group

9.1.1

X-300 approvals, certificates

Approvals issued

Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.

You can check which of the following approvals have been granted for your product by the

markings on the type plate.

EC directives

SIMATIC NET products meet the requirements and aims of the following EC directives.

EMC directive (electromagnetic compatibility)

The SIMATIC NET products described in these operating instructions meet the requirements

of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of

application:

Field of application

Requirements

Emission

Immunity to interference

Industry

EN 61000-6-4 : 2007

EN 61000-6-2 : 2005

WARNING

Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their

target systems may violate the requirements and regulations for safety and electromagnetic

compatibility.
Only use expansions that are approved for the system.

●

Keep to the installation guidelines

The devices meet the requirements if you adhere to the installation and safety

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands