Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 71 / 322

Description of the device

4.2 Product groups

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

4.2.6

Product group X-300M PoE

4.2.6.1

SCALANCE X308-2M PoE product characteristics

Possible attachments

The SCALANCE X308-2M PoE is a partially modular device and has eight ports.

●

Four fixed ports in the base device:

Four PoE-compliant ports (RJ-45 jacks with securing collars) for connection of end

devices or other network segments.

●

Four modular ports via module slots:

Two media modules (optical or electrical as required) can be combined using slots (S1-

S2) depending on the application. End devices and other network segments are

connected according to the media modules being used.

Note
When shipped, the slots for the media modules have a dummy cover fitted.

Image 4-22 SCALANCE X308-2M PoE with dummy covers

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands