Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 61 / 322

Description of the device

4.2 Product groups

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

4.2.2

Product group X-300M

Possible attachments

The SCALANCE X308-2M and X308-2M TS are partly modular devices and each has 8

ports.

●

4 fixed ports in the base device:

4 electrical RJ-45 jacks (with securing collars) for connection of end devices or other

network segments.

●

4 modular ports via module slots:

Two media modules (optical or electrical as required) can be combined using slots (S1-

S2) depending on the application. End devices and other network segments are

connected according to the media modules being used.

Note
When shipped, the slots for the media modules have a dummy cover fitted.

Image 4-13 SCALANCE X308-2M with dummy covers

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands