Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 112 / 322

Installation

5.2 Installing a switch

SCALANCE X-300

112

Operating Instructions, 05/2016, A5E01113043-20

NOTICE
Four-point mounting
If mechanical load is high, the device should be secured at four points. You will find more

detailed information in the section "Mechanical stability in operation".

Normal orientation

Normal orientation of the device

•

The LED display is on the left of the front panel of the hous-

ing.

•

To the right of the LED display, the SCALANCE XR-300 has

connectors for the signaling contacts and the power supply.

Note that the SCALANCE XR-300 is available for different

power supplies (100 to 240 VAC and 24 VDC variants).

•

The Ethernet ports or the slots for the modules are also on

the front of the housing. Slots for the modules are fitted with

dummy covers.

•

The C-PLUG is on the right behind a protective panel se-

cured with screws.

(For more detailed information, refer to the section on the C-

PLUG in the X-300 operating instructions.)

•

The ventilation grilles are on the top, bottom and sides of the

housing.

•

On the back of the housing, you will find the diagnostics port

of the device. (For more details, refer to Diagnostics port

XR-300.) On the SCALANCE X-300M EEC, you will also

find the connectors for the signaling contacts and power

supply here.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands