Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 66 / 322

Description of the device

4.2 Product groups

SCALANCE X-300

Operating Instructions, 05/2016, A5E01113043-20

Image 4-17 SCALANCE X302-7EEC (from below) with protective bracket and LC connector

Replacing the C-PLUG

In the X-300EEC devices, the slot for the C-PLUG is on the top on the housing.

Image 4-18 C-PLUG of the X-300EEC

NOTICE

The C-PLUG may only be removed or inserted when the power supply to the device is

turned off.
In a device with a varnished printed circuit board, you may only use a C-PLUG with a

varnished board.

To remove the C-PLUG, open the slider and close it again after inserting the C-PLUG.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands