Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 154 / 322

Configuration, displays and display elements

7.5 LED display

SCALANCE X-300

154

Operating Instructions, 05/2016, A5E01113043-20

LED color

LED status

Meaning

yellow

flashes / lit

Receiving data at port.
With SCALANCE X-300 devices, both the receipt and the

sending of data is indicated for the optical gigabit ports.

Meaning in display mode B

LED color

LED status

Meaning

off

Port operating at 10 Mbps.

green

Port operating at 100 Mbps.

orange

Port operating at 1000 Mbps.

If there is a problem on the connection and the type of transmission is fixed (autonegotiation

off), the desired status, in other words the set transmission speed (1000 Mbps, 100 Mbps, 10

Mbps) continues to be displayed. If there is a problem on the connection and autonegotiation

is active, the port LED goes off.
Meaning in display mode C

LED color

LED status

Meaning

off

Port operating in half duplex.

green

Port operating in full duplex.

Meaning in display mode D

LED color

LED status

Meaning

off

The port is not monitored; in other words, if a link is not

established at the port, this does not trigger the signaling

contact.

green

The port is monitored, in other words, if no connection

was established at the port (for example no cable insert-

ed), this triggers the signaling contact and an error state

results.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands