Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 97 / 322

Description of the device

4.4 C-PLUG (configuration plug)

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

Inserting in the C-PLUG slot on the IE Switch X-300

Product group

Slot

Figure

C-PLUG

X-300
X-300M

Rear of the device

1. Remove the screw cover.
2. Insert the C-PLUG in the intended slot.
3. Close the screw cover again correctly.

XR-300M

Rear of the device

- right

1. Remove the cover.
2. Insert the C-PLUG in the intended slot.
3. Close the cover again correctly.

X-300EEC

Top of the housing

1. Open the slider.
2. Insert the C-PLUG.
3. Close the slider.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands