Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 70 / 322

Description of the device

4.2 Product groups

SCALANCE X-300

Operating Instructions, 05/2016, A5E01113043-20

4.2.5

XR-300M EEC product group

4.2.5.1

Product characteristics of the SCALANCE XR324-4M EEC

Connection options with the SCALANCE XR324-4M EEC

The SCALANCE XR324-4M EEC is a partially modular device and has 24 ports.

●

16 fixed ports in the base device:

16 RJ-45 jacks for connection of end devices or other network segments.

●

8 modular ports via module slots:

4 modules can be combined using slots (S1-S4) depending on the application. End

devices and other network segments are connected according to the modules being

used.

Image 4-21 XR324-4M EEC

CAUTION

Use only approved media modules
If you use media modules that are not approved by Siemens AG, there is no guarantee

that the device will function according to the specification.
If you use unapproved media modules, this can lead to the following problems:

•

Damage to the device

•

Loss of the approvals

•

Violation of the EMC regulations

Use only approved media modules.

Slot number

Port number

Slot number

Port number

P10

P11

P12

P13

P14

P15

P16

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands