Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 189 / 322

Technical specifications

8.6 XR-300M EEC technical specifications

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

189

8.6.4

Block architecture

Block architecture with SCALANCE XR-300 devices

The XR324-12M and XR324-4M handle the Ethernet frame traffic of the 24 ports with the aid

of three switch blocks.

●

The three switch blocks are connected in series (block 1 via block 2 to block 3)

●

Gigabit wire speed is possible within a block (max. 8 ports per block).

●

Between the blocks there is a bandwidth of 1 gigabit/s available,that must be shared by

all ports for frame traffic between the blocks.

When operating solely with Fast Ethernet (100 Mbps), the XR devices support full wire

speed via all blocks.

Image 8-3

Block architecture of the XR324-12M

Image 8-4

Block architecture of the XR324-4M

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands