Siemens SCALANCE X302-7EEC Operating Instructions Manual Download

Page: 113 / 322

Installation

5.2 Installing a switch

SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20

113

19" rack mounting with normal orientation

19" rack mounting
1.

Select the required rack device (R) and the 19" cabinet.

Fix the two mounting brackets with 4 screws each to the

sides of the housing. The maximum tightening torque for

these screws is 0.5 Nm.

CAUTION: If you install a rack device (R) with compo-

nents inserted.

The locking mechanisms of components installed in the

rack device (R) (for example the handles of media mod-

ules or the clips on the SFP) must be closed.

See also installation of modular devices:

- Installing media modules in a slot

- Installing an SFP in an SFP media module.

Insert the rack device (R) in the 19" cabinet and hold the

rack device (R) at the required height. Make sure that

nothing is obstructing air from entering the ventilation

grilles.
Fit the securing screws to the two mounting brackets to

secure the rack device (R) in the 19" cabinet.

Connect the grounding bolts. On the SCALANCE X-

300EEC, the PE connector is on the bottom of the de-

vice. On the SCALANCE XR-300M EEC, the PE con-

nector is on the rear of the device between the power

connectors.

Fit the connectors for the power supply.

Note that the SCALANCE X-300 is available for different

power supplies (100 to 240 VAC and 24 VDC variants).

Fit the remaining connectors, for example the signaling

contact.

Example of individual installation

Note
Individual installation of the SCALANCE XR-300M
Devices of the XR-300M category can also be installed upright in a cabinet door. In this

case, the LED display is at the front and the data cable outlet at the back at the cabinet door.
Make sure that the mounting bracket is correctly positioned on the rack device (R) so that

the rack device (R) can be mounted securely on the cabinet door.

Summary of Contents for SCALANCE X302-7EEC



































































































































































































































































































































Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands

Siemens SCALANCE X302-7EEC, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE X302-7EEC

Reviews:

Related manuals for SCALANCE X302-7EEC

Brands by name

Popular brands