Siemens SCALANCE S615 Configuration Manual Download Page 73

Page: 73 / 442

Configuration

2.2 Load and Save

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call the command without parameters:

loadsave

Result

You are now in the LOADSAVE configuration mode.
The command prompt is as follows:

cli(config-loadsave)#

Further notes

You exit the LOADSAVE configuration mode with the

exit

command.

2.2.5

Commands in the LOADSAVE configuration mode

This section describes commands that you can call up in the LOADSAVE configuration

mode.
In the Global Configuration mode, enter the

loadsave

command to change to this mode.

You display the valid file types for the commands in the LOADSAVE Configuration mode

with the global command

show loadsave tftp

●

If you exit the LOADSAVE configuration mode with the

exit

command, you return to the

Global Configuration mode.

●

If you exit the LOADSAVE configuration mode with the

end

command, you return to the

Privileged EXEC mode.

2.2.5.1

delete

Description

With this command, you call up the possible files or delete a specific file.

Requirement

You are in the LOADSAVE configuration mode.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands