Siemens SCALANCE S615 Configuration Manual Download Page 197

Page: 197 / 442

Network protocols

6.4 DHCP server

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

197

Syntax

Call up the command with the following parameters:

no ip dhcp-server pool <pool-id (1-5)>

The parameter has the following meaning:

Parameter

Description

Range of values / note

pool-id

ID of the addressed IPv4 address band

1 ... 5

Result

The required IPv4 address band is deleted.

Further notes

You create the IPv4 address band with the

ip dhcp-server pool

command.

6.4.3

Commands in the DHCPPOOL configuration mode

This section describes commands that you can call up in the DHCPPOOL Configuration

mode.
In the Global Configuration mode, enter the

ip dhcp-server pool

command to change to this

mode.

●

If you exit the DHCPPOOL Configuration mode with the

exit

command, you return to the

Global Configuration mode.

●

If you exit the DHCPPOOL Configuration mode with the

end

command, you return to the

Privileged EXEC mode.

6.4.3.1

lease-time

Description

With this command, you specify how long the assigned IPv4 address remains valid. Once

this period has elapsed, the device must either request a new IPv4 address or extend the

lease time of the existing IPv4 address.

Requirement

You are in the DHCPPOOL configuration mode.
The command prompt is as follows:

cli(config-dhcp-pool-<ID>)#

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands