Siemens SCALANCE S615 Configuration Manual Download Page 306

Page: 306 / 442

Security and authentication

9.1 User rights management

SCALANCE S615 Command Line Interface

306

Configuration Manual, 06/2015, C79000-G8976-C406-02

Parameter

Description

Range of values / note

passwd

Value for the password

Enter the password.
The password must meet the following

password policies:

•

Password length: at least 8 characters

•

at least 1 uppercase letter

•

at least 1 special character

•

at least 1 number

privilege

Keyword for the role of the user

user

The user only has read rights.

admin

The user can create, edit or delete

entries.

Result

The new user has been created or the password / role has been changed.

Note
User name cannot be changed
After creating a user, the user name can no longer be modified because the user name is

used for encryption of the password. If a user name needs to be changed, the user must be

deleted and a new user created.

Further notes

You delete a user with the

no user-account

command.

You show the created users with the

show user-accounts

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands