Siemens SCALANCE S615 Configuration Manual Download Page 39

Page: 39 / 442

Configuration

2.1 System

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

Result

The following information about the device is displayed:

●

MAC address of the device

●

Serial Number

●

System up time

●

System name

●

System contact

●

System location

●

Device Type

●

Restart counter

●

Config Save mode

●

Config Change: This indicates whether or not the current configuration has been saved.

●

on the RADIUS server.

2.1.1.4

show interfaces

Description

This command shows the status and the configuration of one, several or all interfaces.

Requirement

You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:

cli>

cli#

Syntax

Call up the command with the following parameters:

show interfaces
[{
[<interface-type><interface-id>]
[{description|status}]
|
{vlan<vlan-id(1-4094)>}
}]

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands