Siemens SCALANCE S615 Configuration Manual Download Page 347

Page: 347 / 442

Security and authentication

9.2 Firewall

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

347

The parameters have the following meaning:

Parameter

Description

Range of values / note

name

Keyword for a protocol name

string

Protocol name

Specify a valid protocol

name.
Maximum of 32 characters

all

Deletes all protocol names

Result

The relevant protocol is deleted.

Further notes

You create a protocol with the

proto name

command.

You display the available protocol names with the

proto show-names

command.

9.2.4.36

proto show-names

Description

With this command, you display the available protocol names.

Requirement

You are in the FIREWALL configuration mode.
The command prompt is as follows:

cli(config-fw)#

Syntax

Call the command without parameter assignment:

proto show-names

Result

The protocol names are listed.

Further notes

You create a protocol with the

proto name

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands