Siemens SCALANCE S615 Configuration Manual Download Page 381

Page: 381 / 442

Security and authentication

9.3 IPsec VPN

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

381

9.3.6.3

auth remcert

Description

With this command you specify that the remote station certificate will be used for

authentication.

Requirement

●

The certificates are loaded.

●

You are in the IPSEC AUTHENTICATION configuration mode.
The command prompt is as follows:

cli(config-conn-auth)#

Syntax

Call up the command with the following parameters:

auth remcert <string(255)> localcert <string(255)>

The parameters have the following meaning:

Remote cert

Keyword for a remote station certificate -

string

Name of the remote station certificate Specify a valid remote station

certificate.

Local cert

Keyword for a device certificate

string

Name of the device certificate

Specify a valid device certificate.

Result

The setting is configured.

Further notes

You show the loaded certificates with the

show-idx

command.

You display this setting and other information with the

show ipsec conn-authentication

command.
You remove the authentication with the

no auth

command.

9.3.6.4

no auth

Description

With this command, you delete the authentication method.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands