Siemens SCALANCE S615 Configuration Manual Download Page 221

Page: 221 / 442

Network protocols

6.5 DNS

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

221

Requirement

You are in the DDNS Client configuration mode.
The command prompt is as follows:

cli(config-ddnsclient)#

Syntax

Call up the command with the following parameters:

password {show-services | <index> <password>}

The parameters have the following meaning:

Parameter

Description

Range of values / note

show-services

Lists the available providers.

index

Number corresponding to a specific

provider.

Specify a valid number.

password

Password

Enter the negotiated password.

Result

The password is configured.

Further notes

You display this setting and other information with the

show ddnsclient information

command.
You configure the user name with the

username

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands