Siemens SCALANCE S615 Configuration Manual Download Page 105

Page: 105 / 442

Functions specific to SCALANCE

3.4 SRS

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

105

You display the numbers of the destination servers with the

logon show-idx

command.

3.4.3.7

logon idx name

Note
This command is only available with a KEY-PLUG.

Description

With this command, you change the user name for access to a specific destination server.

Requirement

You are in the SRS configuration mode.
The command prompt is as follows:

cli(config-srs)#

Syntax

Call up the command with the following parameters:

logon idx <num(1-100)> name <string(255)>

The parameters have the following meaning:

Parameter

Description

Range of values / note

num

Number corresponding to a specific

destination server.

Enter the required number.

name

Keyword for the user name

string

User name

Specify the user name.
Maximum of 255 characters

Result

The user name for the access is changed.

Further notes

You display this setting and other information with the

show srs overview

command.

You change the password with the

logon idx pw

command.

You display the numbers of the destination servers with the

logon show-idx

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands