Siemens SCALANCE S615 Configuration Manual Download Page 410

Page: 410 / 442

Security and authentication

9.4 Certificates

SCALANCE S615 Command Line Interface

410

Configuration Manual, 06/2015, C79000-G8976-C406-02

9.4.2.3

del

Description

With this command, you delete a specific certificate or all certificates.

Requirement

●

Certificates are loaded and are not being used anywhere.

●

You are in the CERT configuration mode.
The command prompt is as follows:

cli(config-cert)#

Syntax

Call up the command with the following parameters:

del { <idx(1-100)> | all }

The parameters have the following meaning:

Parameter

Description

Range of values / note

idx

Number corresponding to a specific certificate. Enter the required number.

1 ... 100

all

Deletes all certificates.

---

Result

The relevant certificate is deleted.

Further notes

You load certificates with the

tftp load

command.

You show the available certificates with the

show-idx

command.

You display the use of the certificate with the

show-info

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands