Siemens SCALANCE S615 Configuration Manual Download Page 404

Page: 404 / 442

Security and authentication

9.3 IPsec VPN

SCALANCE S615 Command Line Interface

404

Configuration Manual, 06/2015, C79000-G8976-C406-02

9.3.8.9

lifebyte

Description

With this command, you configure the data limit to specify the lifetime of the agreed keys.

When the data limit is reached, the key is renegotiated.

Requirement

You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:

cli(config-conn-phs2)#

Syntax

Call up the command with the following parameters:

lifebyte <integer(0-4294967295)>

The parameter has the following meaning:

Parameter

Description

Range of values / note

integer

Data limit

Enter the data limit in bytes.

Result

The data limit is configured.

Further notes

You display this setting and other information with the

show ipsec conn-phase2

command.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands