Siemens SCALANCE S615 Configuration Manual Download Page 261

Page: 261 / 442

Network protocols

6.9 Proxy server

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

261

6.9.3.4

srv name auth

Description

With this command, you change the authentication method of the proxy server.

Requirement

●

The proxy server name has been created.

●

You are in the PROXYSERVER configuration mode.
The command prompt is as follows:

cli(config-proxysrv)#

Syntax

Call up the command with the following parameters:

srv name <string(128)> auth <none|basic|ntlm>

The parameters have the following meaning:

Parameter

Description

Range of values / note

string

Proxy server name

Specify the proxy server

name.
Maximum of 128 characters

none

No authentication

basic

Standard authentication
The user name and password are sent

unencrypted.

ntlm

Authentication according to the NTML

standard (Windows user logon)

Result

The authentication method has been changed.

Further notes

You display the available proxy server names with the

srv show-names

command.

You create the proxy server with the

srv name

command.

6.9.3.5

srv name port

Description

With this command, you change the port of the proxy server.

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands