Siemens SCALANCE S615 Configuration Manual Download Page 189

Page: 189 / 442

Network protocols

6.3 DHCP client

SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02

189

6.3.3.1

ip dhcp config-file-request

Description

If the DHCP config file request option is set, the device requests the TFTP address and the

name of a configuration file from the DHCP server. If the device is restarted following the

completed download, the configuration settings are read from this file.
With this command, you enable the DHCP config file request option.

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Syntax

Call the command without parameters:

ip dhcp config-file-request

Result

The DHCP config file request option is enabled.

Further notes

You disable the DHCP config file request option with the

no ip dhcp config-file-request

command.

6.3.3.2

no ip dhcp config-file-request

Description

With this command, you disable the DHCP config file request option.

Requirement

You are in the Global configuration mode.
The command prompt is as follows:

cli(config)#

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands