![Siemens SCALANCE S615 Configuration Manual Download Page 100](http://html.mh-extra.com/html/siemens/scalance-s615/scalance-s615_configuration-manual_377351100.webp)
Functions specific to SCALANCE
3.4 SRS
SCALANCE S615 Command Line Interface
100
Configuration Manual, 06/2015, C79000-G8976-C406-02
3.4.3.2
logon
Note
This command is only available with a KEY-PLUG.
Description
With this command you specify which destination server will be used.
Requirement
You are in the SRS configuration mode.
The command prompt is as follows:
cli(config-srs)#
Syntax
Call up the command with the following parameters:
logon {idx <num(1-100)> | all} {enabled|disabled}
The parameters have the following meaning:
Parameter
Description
Range of values / note
idx
Keyword for the number of the destina-
tion server
-
index
Number corresponding to a specific
destination server.
Enter the required number.
1 ... 100
all
Uses all destination servers
-
enabled
Enables the entry
-
disabled
Disables the entry.
Result
The specified destination server is enabled.
Further notes
You display this setting and other information with the
show srs overview
command.
You create the destination server with the
logon
command.
You disable the destination server with the
no logon (disable)
command.
You display the numbers of the destination servers with the
logon show-idx
command.