Siemens SCALANCE S615 Configuration Manual Download Page 264

Page: 264 / 442

Network protocols

6.9 Proxy server

SCALANCE S615 Command Line Interface

264

Configuration Manual, 06/2015, C79000-G8976-C406-02

The parameters have the following meaning:

Parameter

Description

Range of values / note

string

Proxy server name

Specify the proxy server

name.
Maximum of 128 characters

http

Universal proxy server

socks

Keyword for port

Result

The type of the proxy server has been changed.

Further notes

You display the available proxy server names with the

srv show-names

command.

You create the proxy server with the

srv name

command.

6.9.3.8

srv name user

Description

With this command, you change the user name for access to the proxy server.

Requirement

●

When selecting the authentication method

basic

is used.

●

The proxy server name has been created.

●

You are in the PROXYSERVER configuration mode.
The command prompt is as follows:

cli(config-proxysrv)#

Syntax

Call up the command with the following parameters:

srv name <string(128)> user <name(255)>

Summary of Contents for SCALANCE S615



























































































































































































































































































































































































































































Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands

Siemens SCALANCE S615, Configuration Manual

Search results

Summary of Contents for SCALANCE S615

Reviews:

Brands by name

Popular brands