manualshive.com logo in svg

Siemens MAMMOMAT Novation DR, Manual, Page: 82 / 116

Share
Download
Siemens MAMMOMAT Novation DR Manual Download Page 82

82

Image Quality

MAMMOMAT Novation DR

SPB7-250.815.06.02.02

Siemens AG

12.05

CS SD 24

Page 82 of 116

Medical Solutions

Setting the display density and display contrast

•

After the customer has selected several images which he/she finds the most suitable 
for representing the correct image quality, it is recommended to enter the parameters 
for 

DD

 (Display Density) and 

DC

 (Display Contrast) in the ini-file. Proceed as follows for 

this: 

The procedure described there should be performed completely.

1. Call up the local service software and select 

Utilities -> Escape to OS

.

2. In the 

Parameters

 field, enter the command:

start runas  

/user:administrator cmd

The Windows operating system will open a command window. A message may appear, 
prompting you to enter the appropriate password to log in as administrator. Enter the 
correct password.

3. A command window will open granting you administrator rights (provided that you are 

logged in as administrator).

4. Enter:

notepad C:\AWS\config\LoradIP\AwsIpmParamDefault_Lorad.ini

and press Return or Enter. A TXT file is called up. In approximately in the 

10th

 and 

11th

 

line, you can find the values for 

DisplayDensity

 and the 

DisplayContrast

.

5. Change the settings for DisplayDensity and DisplayContrast.

6. Save the changes and close the file.

7. Close the command window and the service software window.

8. Select 

Options -> End session

 to restart the system and log in with the appropriate 

user name and the password. 

9. After entering the new parameters, a few patient images should be taken to find out 

whether the changes meet the customer's requirements.

10. Take down the current settings for the image display density /contrast values in the 

"Start-up protocol" on 

(Start-up Protocol / p. 97)

.

11. Continue with "Final procedures" on page 

(Final procedures / p. 89)

.

Summary of Contents for MAMMOMAT Novation DR





















































































































Reviews:

No comments