manualshive.com logo in svg

Siemens MAMMOMAT Novation DR, Manual, Page: 87 / 116

Share
Download
Siemens MAMMOMAT Novation DR Manual Download Page 87

Siemens AG

SPB7-250.815.06.02.02

MAMMOMAT Novation DR

12.05

CS SD 24

Image Quality

87

Page 87 of 116

Medical Solutions

Prerequisites

•

Click the 

Resources Monitor

 icon (disk space indicator) in the bottom right corner of 

the syngo screen to check this. The free storage space is shown under the 

Local 

(Blob)

 (Blob - Binary Large Object) 

Free

 entry.

1. Load the images by opening the syngo 

Patient Browser

2. Select the 

cdr

 icon

3. Select the desired data objects

4. Click the 

Import

 icon, or 

Transfer-> Import

 menu item.

Procedure for creating customer-specific IPPG settings

.

Clinical patient instances are included on an additional CD. This CD contains 3 patients 
with one CC and one MLO exposure each.

•

These images need to be transferred to the reporting station, e.g. Mammo Report Plus. 

•

It is recommended to show the images to the reporting physician(s). The application 
specialist assisting the customer's staff should take down the comments of the physi-
cians on the individual images indicated on the viewing station. 

•

For each of the 3 patients, the IPPG settings Normal, Low Contrast and High Contrast 
are available. If the customer wants to adjust the basic settings for brightness and con-
trast, the images must be windowed according to the customer's preferences based on 
an IPPG setting.

•

New values for window width and window center can be determined using the 

image 

processing configurator

. The values set by the customer as the optimal ones are en-

tered in the configurator, whereupon the average values are determined.

•

The new values (window width and window center) can then be entered in a newly cre-
ated IPPG (e.g. called "Standard") and stored.

The

 image processing configurator tool

 gives assistance in determining the cus-

tomer-specific values. It can be downloaded from the Siemens Med Intranet at:

CS/For Service/SP/Mammography/Mammomat Novation DR WH AWS/Software

How to use the configuration tool

1. Import the example images to the AWS and send it to the MammoReport

2. If the customer wants to adjust the default contrast or brightness of the images, choose 

the "Processing Parameter Group" (PPG) that fits the best and optimize the window 
settings to the personal preferences of the customer, e.g. "Normal"

3. Start the configuration tool

4. Choose the "Processing Parameter Group" (PPG) on which you based the optimiza-

tion, e.g. "Normal"

5. Enter the new window level and width value for every patient and choose 

"Calculate"

 

to get the new parameters

Summary of Contents for MAMMOMAT Novation DR





















































































































Reviews:

No comments