manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 91 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 91

HiPath BizIP update

91

Exporting a network configuration file

1. Click 

Backup Configuration

 in the 

Network Configuration File area. 

2. The configuration is exported and the 

File Download

 dialog box ap-

pears. Click 

Save

 to save the 

config.bin

 file on your PC hard disk.

Importing a network configuration file

1. First check whether a backup file has been saved on your PC hard disk 

(default file name: 

config.bin

).

2. Click 

Browse

 to select the backup file.

3. Click 

Restore Configuration

 

The restore can take a few seconds. After the update, the BizIP AD 20 is 
restarted.

Exporting the telephone configuration file

1. Click 

Backup Configuration

 in the 

Telephone Configuration File

 ar-

ea.

2. The configuration is exported and the 

File Download

 dialog box ap-

pears. Click 

Save

 to save the 

config.xml

 file on your PC hard drive.

Importing a telephone configuration file

1. First check whether a backup file has been saved on your PC hard disk 

(default file name: 

config.xml

).

2. Click 

Browse

 to select the backup file.

3. Click 

Restore Configuration

The restore can take a few seconds. After the update, the BizIP AD 20 is 
restarted.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments