manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 48 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 48

Configuring a LAN

48

Setting up dynamic IP address assignment (DHCP) 

You must configure a unique IP address for every BizIP 410 telephone. A 

 

DHCP

 server is integrated in the BizIP AD 20 to relieve you of this work 

and to help you maintain an overview in the event of changes in the 
HiPath BizIP network. 

Using an integrated DHCP service 

You have three different options:
•

DHCP Server

You use the integrated DHCP service of BizIP AD 20 (recommended, 
standard).

•

DHCP Relay

You use an external, possibly already existing  DHCP server (not an in-
ternal DHCP service).

•

No DHCP Service

You deactivate the DHCP service. In this case, the IP data of all devices 
must be administered manually 

Æ

Page 51.

Data required

•

When using an external DHCP server: IP address of the server.

•

When using the integrated DHCP service if a fixed IP address is re-
quired:
– A freely available IP address.
– The network name of the device with a fixed IP address.
– The MAC address of the device with a fixed IP address.

Only make changes here if the use of this configuration would result 
in conflict with other network components. Otherwise, you should 
leave this configuration unchanged.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments