manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 76 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 76

Administering HiPath BizIP time

76

Changing the date/time manually 

If there is no 

 

SNTP

 server available, the date and time can also be de-

fined manually. If an SNTP server is configured, manually altered time data 
is overwritten by the data from the SNTP server at the next SNTP update. 

Data required

•

Today’s  date

•

Current time

Administration on the PC

Web

 >

System-wide Settings

 >

Time and Date

Changing the time manually

•

Enter the current time under 

Local Time (hh:mm)

.

•

Enter today’s date under 

Date (day, month, year)

.

•

Select the required format to be displayed in the BizIP 410 directory un-
der 

Date Format

.

Click 

Submit

 to incorporate your data.

This can also be carried out directly in the user area on the BizIP 410 
telephone. For further information, see the Operating Manual.

The details in relation to the 

SNTP server IP address

 and 

Time 

zone offset (hours)

 are only required if an SNTP server is to be 

used and the DHCP server does not supply this data or if there is no 
DHCP server active. The DHCP server of the HiPath BizIP supplies 
this data.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments