manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 55 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 55

Configuring a LAN

55

Configuring dynamic IP routes 

Data required

•

 

RIP

 version

•

Support, depending on interface and mode 

Administration on the PC

Web

 >

Connectivity Settings

 >

IP Routing

 >

Dynamic Routing

Configuring dynamic routing

•

Activating/deactivating dynamic routing. The 

Enabled

 option activates 

the following settings.

•

Select the supported version of the routing information protocol under 

RIP Version

.

•

Select the mode for which dynamic routing is to apply under 

LAN

 and 

Public-Network

 (the definable connection name is displayed as the 

name):
–

None

 (RIP data is neither sent nor received).

–

Inbound

 (RIP data is received but not sent).

–

Outbound

 (RIP data is sent but not received).

–

All

 (RIP data is sent and received).

Click 

Apply

 to apply the changes.

It only makes sense to use 

 

RIP

 if HiPath BizIP is operated in con-

junction with other routers that support dynamic routing. 
RIP does not need to be configured in any other case.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments