manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 15 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 15

Getting started

15

Performing installation

What was your previous configuration?

•

I have a PC network (Ethernet LAN) with a router and DSL connec-
tion.

Disconnect the existing router from the DSL modem and from the net-
work switch. The old router is no longer required because this function 
is performed by the BizIP AD 20.

The BizIP AD 20 can also perform the DHCP function (default: DHCP is 
activated).

•

I have a single PC with DSL access.

Disconnect the PC from the DSL modem. You now need a network 
switch to connect the devices.

•

I do not have a PC network or DSL access.

First apply to the relevant DSL provider for DSL access and install the 
devices provided (normally a DSL splitter and modem). Contact your 
DSL provider for information on how to install the devices.

Before beginning the remainder of the installation, you should have a free 
port on an ISDN network terminator (NTBA) and on a DSL modem (NTB-
BA), depending on the type of access you require.

If you have a combined modem and router, you must disable the 
router function (the router does not perform a PPPoE logon).

The HiPath BizIP devices must all be located in one LAN segment 
without intermediate routing.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments