manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 107 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 107

Administration scenarios

107

Mailbox properties

A detailed description of the procedure for changing the mailbox proper-
ties can be found in the Operating Manual.

Overview

The properties listed below apply to both user and group mailboxes.

The mailbox properties in detail

Messages

If a call is not answered by the time auto answer is running, the mailbox 
picks up the call. Following playback of the greeting and a beep, the mail-
box saves the message. When a new message is listened to, it is marked 
as "listened to" after you exit this menu item. When a message is deleted, 
it is no longer available and can no longer be accessed.

Callback to user

If a caller who has left a message in a mailbox provides his phone number 
during the call (

 

CLIP

), this number is assigned to the message. A caller 

who has left a message can therefore be called back.

Greeting

Every mailbox has two default greetings. These can be replaced by person-
al greetings (max. length: 1 minute). You can toggle between the two 
greetings at any time. When a personal greeting is deleted, the default 
greeting is restored. 

Mailbox (on / off)

When a mailbox is switched off, no greeting is played back and no messag-
es are recorded. If this station is now called, the telephone rings without 
call pickup by an answer machine.

Feature

Mailbox

Messages

New messages and messages that 
have been listened to

Callback to user

Possible

Greetings

2

Mailbox (on / off)

Selectable

Recording of calls (on / off)

Selectable

Time until auto answer

0 - 59 seconds

Message length

Between 1 and 5 minutes

Redirection to intercept position

Possible

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments