manualshive.com logo in svg

Siemens Hipath bizip 410, Administration Manual, Page: 7 / 144

Share
Download
Siemens Hipath bizip 410 Administration Manual Download Page 7

HiPath BizIP Overview

7

HiPath BizIP Overview

Your HiPath BizIP is a pioneering communication platform based on forward-looking tech-
nology. The use of peer-to-peer technology in the LAN means that adding more telephones 
to the system could not be easier. 

You will find details of the various devices beginning on 

Æ

Page 10.

Network access for data and voice signals is provided via an access device (gateway). The 
system can be used both for Internet telephony (VoIP) and ISDN. 
Each system telephone has a personal answer machine. In addition, two analog tele-
phones are also supported (for example, fax).

This manual is intended both for the service engineer who is installing and configuring the 
system, and the customer’s service personnel if the latter is responsible for installing and 
administering the system.

All trademarks used are the property of Siemens AG or their respective owners.

Important information 

Since the HiPath BizIP firmware is continuously being improved, we recommended 
that you update the BizIP 410 e 410 telephone firmware before initial use 

Æ

Page 24.

Only use the power supply specified for the access device or telephones.

Do not install the access device or telephones in bathrooms or shower 
rooms. The access device and telephones are not splash-proof.

Do not operate the telephone in environments where there is a danger of ex-
plosion.

Never open the telephones or a key module! In the event of problems, con-
sult your service personnel or specialist dealer.

Use only original Siemens accessories! 
The use of other accessories is dangerous and will invalidate the warranty 
and the CE mark.

Summary of Contents for Hipath bizip 410

















































































































































Reviews:

No comments