Siemens Hipath bizip 410 Administration Manual Download Page 47

Page: 47 / 144

Configuring a LAN

Only make changes here if you want to adapt your HiPath BizIP to particu-
lar requirements (e.g. integration in an existing

LAN

Changing IP data of the BizIP AD 20

You can change the IP address and subnet mask for the BizIP AD 20.

Administration on the PC

Web

Connectivity Settings

LAN

Internal Router IP Addresses

Changing IP data

•

Under

Primary IP Address

, enter the IP address for the BizIP AD 20

(default: 192.168.1.1).

•

Under

Subnet Mask

, enter the subnet mask for the BizIP AD 20 (de-

fault: 255.255.255.0).

Click

Apply

to apply your changes.

The IP data must correspond to the entries for the active DHCP service in
BizIP AD 20

Page 48.

Only make changes here if the use of the standard values would re-
sult in conflict with other network components.

Summary of Contents for Hipath bizip 410

















































































































































Search results

Summary of Contents for Hipath bizip 410

Reviews:

Siemens Hipath bizip 410, Administration Manual, Page: 47 / 144

Search results

Summary of Contents for Hipath bizip 410

Reviews: