Siemens Hipath bizip 410 Administration Manual Download Page 27

Page: 27 / 144

Administering your HiPath BizIP

You can adjust the HiPath BizIP to your personal requirements. The
HiPath BizIP administration required for this purpose is easily performed
using a PC with a graphical user interface.

Prerequisites:

•

Your HiPath BizIP devices have already been installed

Page 14.

•

The PC used for administration is connected to the HiPath BizIP LAN.

Follow the steps below to administer a HiPath BizIP device (for
example the BizIP AD 20 or a BizIP 410 telephone):

1. Open Microsoft Internet Explorer on your PC. As shown in the over-

view on

Page 16, the PC must be connected to the BizIP AD 20.

2. Enter the IP address of the BizIP AD 20:

http://192.168.1.1/

(default, can

be changed, see

Page 47).

3. The BizIP AD 20 login window appears.

Enter the administration password under

Password

(default:

123456

and click

Login

Throughout this document, the term

Web

at the beginning of

the menu path will indicate the opening of this interface
(for example, see

Page 32).

Summary of Contents for Hipath bizip 410

















































































































































Search results

Summary of Contents for Hipath bizip 410

Reviews:

Siemens Hipath bizip 410, Administration Manual, Page: 27 / 144

Search results

Summary of Contents for Hipath bizip 410

Reviews: