Siemens Hipath bizip 410, Administration Manual, Page: 61 / 144

Security for your HiPath BizIP
61
4. Specify which IP addresses (and submasks where appropriate) are
to be restricted/allowed under Source Address Type .
5. Specify which port number(s) are to be restricted/allowed under Port
range .
6. Select whether or not these filter rules are to be used under Status .
7. Click Add to add the filter rules to the list of rules.
8. Repeat Step 1 to 7 as necessary to set up new filter rules.
• With an already existing filter rule you can use Modify to make chang-
es to the filter rules or delete the filter rules with Delete .
Click Apply to incorporate your data.
To temporarily disable a filter rule, click Modify and set the sta-
tus of the filter rule to Disabled .