Siemens FST020, Function Manual, Page: 19 / 194

FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
17
Quick start
2
2.1 Introduction
The quick start wizard topics and introductory explanations are listed below. For detailed
quick start wizard procedures refer to the FST020 Operating Instructions manual.
2.2 Quick commissioning
Description
Quick commissioning - The Quick commissioning wizard will guide you through configuration
of parameters essential for your application. You configure parameters essential for your
application by selecting the configuration path and sub-wizards appropriate for your
application.
2.3 Sensor settings
Description
The sensor settings wizard will guide you through configuration of essential parameters.
2.4 Process values
The Process values wizard will guide you through setup of process values for your
application. The prioritizing of the process values automatically configures the measurement
views on the display. The process value configured as 1st process value appears as first
value in the views.
2.5 Inputs and outputs
The Inputs and outputs wizard will guide you through setup of inputs and outputs on the
available channels.
2.6 Copy configuration
This wizard allows you to copy the configuration from the SensorFlash to the device.