Siemens FST020 Function Manual Download Page 163

Page: 163 / 194

Maintenance and diagnostics

4.8 Simulation

FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA

161

4.8.1.3

Channel 4 - Input/output

4.8.1.3.1 Operation mode

Description
Set the output functionality you want the channel to operate.

Setting Off; Frequency output; Pulse output
Default Off

Related
The setting of this parameter affects the setting options in parameter Simulation value.

Path

Maintenance and diagnostics

→

Simulation

→

Simulation inputs and outputs

→

Channel 4 -

input/output

→

Operation mode

4.8.1.3.2 Simulation

Description
Enables or disables simulation of Channel 4 input/output.

Setting Disabled; Enabled
Default Disabled

Related
Only if this parameter is set to Enabled, then the setting of parameter Simulation value will

be relevant.

Path

Maintenance and diagnostics

→

Simulation

→

Simulation inputs and outputs

→

Channel 4 -

input/output

→

Simulation

4.8.1.3.3 Simulation value

Description
Set the frequency value to be output on the channel when frequency output simulation is

enabled.
Set the pulse value to be output on the channel when pulse output simulation is enabled.

Setting 0.0 Hz to 12500.0 Hz
Default 1.0 Hz
Operation mode is set to Frequency output

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 163 / 194

Search results

Summary of Contents for FST020

Reviews: