Siemens FST020 Function Manual Download Page 168

Page: 168 / 194

Maintenance and diagnostics

4.8 Simulation

FST020 Function manual

166

Function Manual, 09/2017, A5E42949526-AA

Related
If Simulation mode is set to Simulate alarm (ID number), Alarms and its subcategories will be

available.
If Simulation mode is set to Simulate alarm class, Alarm class will be available.

Path

Maintenance and diagnostics

→

Simulation

→

Simulation alarms

→

Simulation mode

4.8.3.2

Alarms

4.8.3.2.1 Sensor alarms (1)

Description
The simulation of single and multiple Sensor alarms (1) can be configured.

Setting Various sensor alarms can be selected
Default None selected

Related
This parameter is only available if Simulation mode is set to Simulate alarm (ID number).

Path

Maintenance and diagnostics

→

Simulation

→

Simulation alarms

→

Alarms

→

Sensor alarms

(1)

4.8.3.2.2 Sensor alarms (2)

Description
The simulation of single and multiple Sensor alarms (2) can be configured.

Setting Various sensor alarms can be selected
Default None selected

Related
This parameter is only available if Simulation mode is set to Simulate alarm (ID number).

Path

Maintenance and diagnostics

→

Simulation

→

Simulation alarms

→

Alarms

→

Sensor alarms

(2)

4.8.3.2.3 Process alarms (1)

Description
The simulation of single and multiple Process alarms (1) can be configured.

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 168 / 194

Search results

Summary of Contents for FST020

Reviews: