Siemens FST020 Function Manual Download Page 101

Page: 101 / 194

Setup

3.9 View 2

FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA

3.9.8

6th process value

Description
The display 6th Process Value can be selected.

Setting Mass flow; Volume flow; Density; Fluid Temperature; Totalizer 1
Default Totalizer 1

Related
This parameter is only available if View is set to Six Values or Six Diagnostic Values.

Path

Setup

→

Display

→

→

6th Process Value

3.9.9

Trend scale mode

Description
The Trend Scale Mode can be selected with automatic scaling or fixed scaling.

Setting Auto; Fixed
Default Auto

Related
This parameter is only available if View is set to Totalizer or 1 Value and Graph.
If Fixed is selected, Trend Scale Lower Limit and Trend Scale Upper Limit must be

configured.

Path

Setup

→

Display

→

→

Trend Scale Mode

3.9.10

Trend log time window

Description
The Trend log time window logging period (time axis length) can be selected.

Setting 1 Minute; 5 Minutes; 15 Minutes; 30 Minutes; 1 Hour; 2 Hours; 3 Hours
Default 5 Minutes

Related
This parameter is only available if View is set to Totalizer or 1 Value and Graph.

Path

Setup

→

Display

→

→

Trend log time window

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 101 / 194

Search results

Summary of Contents for FST020

Reviews: