Siemens FST020, Function Manual, Page: 154 / 194

Maintenance and diagnostics
4.5 Peak values
FST020 Function manual
152
Function Manual, 09/2017, A5E42949526-AA
4.5.2.6 Reset peak values
Description
This command is used to reset the logging of the recorded maximum and minimum values
monitored. The drag pointers will be set to the current value.
Setting Cancel; Ok
Default Cancel
Related
This parameter is only available if Process value is not set to Disabled.
Path Maintenance and diagnostics → Peak values → Process value 2 → Reset logging
4.5.3 Process value 3
4.5.3.1 Process value
Description
Assign the process value to be monitored.
Setting Disabled; Volume flow; Mass flow; Sound velocity; Flow velocity; Density; Medium temper-
ature; Kinematic viscosity; Totalizer 1
Default Disabled
Related
If this parameter is set to any other setting than Disabled, parameters Maximum value,
Maximum value timestamp, Minimum value, Minimum value timestamp, and Reset logging
will be available.
Path Maintenance and diagnostics → Peak values → Process value 3 → Process value
4.5.3.2 Maximum
Displays maximum measured value.
Related
This parameter is only available if Process value is not set to Disabled.
Path Maintenance and diagnostics → Peak values → Process value 3 → Maximum value